With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) memory, checking (function 02)


NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on by pressing PRINT button (indicator lamp in button lights up).

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2- to select "Check DTC Memory" function 02.

Indicated on display


Rapid data transfer Q
02 - Check DTC Memory


- Press -Q- button to confirm input.

The number of stored DTCs appears on the display.


X DTC recognized ->


Stored DTCs are displayed and printed out one after another.

- Check print-out against DTC table and repair all malfunctions as necessary. Instrument Cluster

If "No DTC recognized" is displayed the program will return to the initial position after pressing -> button.


No DTC recognized ->


Indicated on display


Rapid data transfer HELP
Select function XX


If something else is displayed See Scan Tool operating instructions
- End output (function 06). End Output (Function 06)
- Switch ignition off.
- Disconnect Data Link Connector (DLC).