Brake Lamp: Locations

Rear lights, assembly







CAUTION!
Before working on the electrical system:
- Determine the correct coding for the anti-theft radio.
- Switch ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, recode and check operation of the anti-theft radio.


1 - Housing
- Replace if gasket is faulty
2 - Turn signal bulb
12 V / 21 W
3 - O-ring
- Replace if damaged
4 - Bulb holder for turn signal
5 - Bulb holder for brake light and taillight
6 - Dual filament bulb for brake light and taillight
12 V / 21 W / 5W