With Manufacturer Scan Tool

Erase DTC Memory (Function 05)

- Connect VAG 1551 scan tool. Scan Tool Connecting and Initial Checks
- Initiate On Board Diagnostic (OBD). On Board Diagnostic (OBD), Initiating Program
- Switch printer on with "PRINT" button (warning lamp in button lights up).

Requirements

- All malfunctions repaired
- DTC memory checked again
- Press buttons -0- and -5- to select "Erase DTC Memory" function 05).

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC Memory is erased!


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- This message indicates an error in the test sequence.


Attention! ->
DTC Memory was not interrogated


- Adhere exactly to the test sequence: first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory.