Undamaged Window, Preparing For Installation

Undamaged Window, Preparing For Installation







NOTE:
- When re-using an undamaged window, cut back residual adhesive to 1-2 mm (0.039-0.078 in.) just before re-installation. Do not damage primer or ceramic coating.
- Residual material serves as adhesion base for newly applied adhesive sealing compound.
- Exception: If bonding is not performed immediately after cutting back, the remaining residual material must be activated with activator D 181 801 A1.


WARNING!
Do not prime adhesive surface and do not treat with a cleaning solution. Keep adhesive surface free of dirt and grease.