Clutch Release Fork, M/T

Clutch Release Mechanism, Servicing





1. Transmission
2. Ball stud
^ Lubricate with MoS2 grease
^ 25 Nm (18 ft. lbs.)
3. Intermediate piece
4. Dished washer
^ Smaller diameter (convex side) toward guide sleeve
5. O-ring
^ Always replace
6. Input shaft oil seal
^ Pull out of guide sleeve with extractor lever VW 681
^ Drive in onto stop with sleeve VW 193
7. Guide sleeve
8. Retaining spring
^ Secure to clutch release lever
9. Clutch release lever
10. Torx socket head bolt
^ 35 Nm (26 ft. lbs.)
^ Self-locking
^ Always replace
11. Release bearing
^ Do not wash bearing, only wipe
^ Replace noisy bearings
12. Socket head bolt
^ 20 Nm (15 ft. lbs.)
13. Slave cylinder
^ Removing and installing. Clutch Master Cylinder
14. Plunger
^ Grease end of plunger with MoS2 grease