Secondary Air Injection (AIR) Pump Motor -V101-, Overview

Secondary Air Injection (Air) Pump Motor -V101- Assembly Overview





Note:
- Components marked with an * are checked by the On Board Diagnostic (OBD)
- Components marked with ** are checked by the output diagnostic test mode.

1. - Secondary Air Injection (AIR) pump motor V101 */**
2. - Front right - longitudinal member
3. - 10 Nm
4. - Bracket
- For secondary air injection pump motor
- Secured to intake manifold
5. - Insulation ring
- Securing collar must face to pump eye
6. - Protective cap
7. - Connector
- For secondary air injection pump motor
- Black, 2-pin
8. - To connecting pipe
- Item 15, Connecting Pipe and Combi-Valves - Assembly Overview
9. - Pressure hose
- Ensure seated tightly
- Press together at front to release
10. - O-Ring
- Always replace
11. - Intake hose
- Ensure seated tightly
- Press together at front to release
12. - From air cleaner upper part
- Service and Repair