Body Flange, Preparing For Glazing

Body Flange, Preparing For Glazing







- Cut back remaining material on window flange with scraping blade V.A.G 1561/8, but do not remove completely.


NOTE: Remaining material is required as a base for better adhesion of the new coat of adhesive sealing material to be applied. Keep dirt and grease off of adhesive surfaces.


Warning!
Activator must not have contact with paint, otherwise the paint finish will be damaged.


Exception: If bonding is not performed immediately after cutting back, the remaining residual material must be activated with activator D 181 801 A1.


NOTE: If the window flange has been repaired or partially renewed, after painting, the area concerned must be cleaned and primed again.