Body Side

Cooling system components, body side
1. Radiator
^ Removing and installing, Refer to Radiator.
^ After replacing radiator, replace engine coolant
^ With ATF cooler on vehicles with automatic transmission, Refer to Transmission and Drivetrain.
^ Cleaning ATF cooler: Refer to Transmission and Drivetrain.
2. Securing clip
3. Securing rubber
4. Upper coolant hose
^ Secured to radiator with retaining clip
^ Ensure securely seated
^ Coolant hose connection diagram, Refer to Radiator Hose.
5. Rubber washer
6. Radiator fan - V7
^ Electric fan as optional extra
7. Fan ring
^ Clipped into air ducting and secured with securing bolt (item 8)
8. Locking bolt
9. 10 Nm
10. 2-pin connector
11. Lower coolant hose
^ Secured to radiator with retaining clip
^ Ensure securely seated
12. O-ring
^ Replace if damaged
13. Connector
^ Black, 3 pin
^ For radiator fan thermo switch
14. Radiator fan thermo switch -F18-, 35 Nm
^ For electric fan
^ Switching temperatures:
Stage 1 on: 92 to 97° C
Stage 1 off: 84 to 91° C
Stage 2 on: 99 to 105° C
Stage 2 off: 91 to 98° C
15. Seal
^ Always replace
16. Drain screw, 10 Nm