Programming and Relearning
MFI adaptation
NOTE:
- Only an adjustment range of 85% - 715% is possible.
- Adjustment values are input in 5% steps.
Prerequisites
- Speedometer and odometer displays OK
- DTC memory of Engine Control Module (ECM) and instrument cluster checked and "No DTC recognized" appears in display.
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select function 10, "Adaptation"
Indicated on display:
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display:
Adaptation
Enter channel number XX
- Press buttons -0- and -3- to select channel 03.
Indicated on display:
Adaptation ->
Enter channel number 03
- Press -Q- button to confirm input.
Indicated on display:
Channel 3 Adaptation 100
<-13->
- Forward with -> button.
Indicated on display:
Channel 3 Adaptation 100
Input adaptation value XXXXX
NOTE: Adaptation is only possible with direct input.
- Enter applicable correction value using VAG 1551/1552 button pad. Fill first positions with "0".
Example:
Value required: 90%; button pad entry: 00090
Indicated on display:
Channel 3 Adaptation 100 Q
Enter Adaptation value 00090
- Press -Q- button to confirm input.
Indicated on display:
Channel 3 Adaptation 90 Q
<-13->
- Press -Q- button to confirm input.
Indicated on display:
Channel 3 Adaptation 90 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display:
Channel 3 Adaptation 90 ->
Changed value is stored
- Press -> button to complete adaptation sequence.
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- End output (function 06).
NOTE: A wrong entry switches scan tool to "Function" mode.
Will be indicated on display:
Function is unknown or ->
cannot be carried out at the moment
- Press -> button.
- Select function 10 "Adaptation" and adaptation channel 03 again.
- Carry out corrections to consumption indicator as described above and be sure to press -Q- button to confirm all inputs.