II -Reverse Gear Clutch -K2- to Large Sun Gear

II -Reverse gear clutch -K2- to large sun gear, removing and installing
Overview; General Information
Disassembling planetary transmission; Transmission, Disassembling
Assembling; Transmission, Assembling





1. Reverse gear clutch -K2- Disassembling and assembling Clutch
2. Shim
^ Determining thickness; see Adjusting clutch play between -K1- and -K2-. Clutch
^ 1 or 2 shims can be installed
3. 1st to 3rd gear clutch -K1-
^ Disassembling and assembling; Clutch
4. Seal
^ Always replace
5. 3rd and 4th gear clutch -K3- with turbine shaft
^ Disassembling and assembling
6. Axial needle bearing with washer
^ Axial needle bearing faces toward small drive shaft
7. Small drive shaft
8. Needle bearing
9. Axial needle bearing
10. Large drive shaft
11. Axial needle bearing
12. Axial needle bearing washer
^ With shoulder
13. Large sun gear
14. Axial needle bearing
15. Axial needle bearing washer
16. Small sun gear
^ Can only be taken out of planet carrier on transmission "DFG"
17. Transmission housing with free gear and circlips installed
18. Planet carrier shim
^ Determining thickness
19. Washer
20. Bolt
^ 30 Nm i22 ft. lbs.)
^ For small input shaft
21. Cover