III - One-Way Clutch and Reverse Gear Brake -B1-

III - One-way clutch and reverse gear brake -B1-, removing and installing
Overview; General Information
Disassembling transmission; Transmission, Disassembling
Assembling; Transmission, Assembling





1. Circlip
^ For supporting tube -B2-
^ Insert baffle block before installing circlip
^ Installation position: Circlip open ends faces free gear retaining wedge
2. Baffle block
^ Insert before inserting Circlip (item 1)
3. Circlip
^ For free gear
4. One-way clutch with -B1- piston
^ Before removing free gear, remove valve body and sealing plugs.
^ Disassembling and assembling; Clutch
5. Dished spring
^ Install with convex facing free gear
6. Pressure plate -B1-
^ Install with flat side facing plates
^ Spare part application according to transmission code letters
7. Inner plate, -B1-
^ Quantity of inner plates -B1-; Specifications
^ Before installing place plates in ATF for 15 minutes
8. Outer plate, -B1-
^ Quantity of outer plates -B1-; Specifications
9. Shim
^ Determining thickness, adjusting reverse gear brake -B1-
^ 1 or 2 shims can be installed
10. Transmission housing with planet carrier installed