Radio/Stereo

Connector I consists of three separate connector parts:

20 pin multi-connector I -T20-, part 1, yellow
1 - Line out, left rear
2 - Line out, right rear
3 - Ground (GND)
4 - Line out, left rear
5 - Line out, right rear
6 - Switched positive (B+) for amplifier

20 pin multi-connector I -T20-, part 2, green*
7 - Open
8 - Clock
9 - DATA
10 - ENA
11 - Remote control (serial input)
12 - Open

*) If equipped

20 pin multi-connector I -T20-, part 3, blue
13 - CID changer - DATA IN
14 - CID changer - DATA OUT
15 - CID changer - CLOCK
16 - CID changer - Power supply, positive (B+) supply
17 - CID changer - Control signal
18 - CID changer - Power supply, negative (-) ground supply
19 - CID changer - LINE OUT, left 20 - CID changer - LINE OUT right

8 pin multi-connector 11 -T8a-, brown
1 - Speaker + right rear
2 - Speaker - right rear
3 - Speaker + right front
4 - Speaker - right front
5 - Speaker + left front
6 - Speaker - left front
7 - Speaker + left rear
8 - Speaker - left rear

8 pin multi-connector III -T8-, black
1 - Signal for anti-theft alarm system
2 - Open
3 - Data Link Connector (DLC) K-wire
4 - Ignition switch - S contact
5 - Battery, positive (B+) supply, terminal 30 (control input for "SAFE" d is play/anti-theft)
6 - Illumination, terminal 58b
7 - Battery, positive (B+) supply, terminal 30
8 - Battery, negative (-) ground supply, terminal 31