Convertible Top: Testing and Inspection

Test conditions:
- Power convertible top mechanically O.K.
- Fuse 16,15 Amp. (on fuse/relay panel) O.K.
- Convertible Top Hydraulic Pump Relay -J321- (53) O.K.
- Day-time Running Lights Switch On Relay -J90- (173) O.K.
- Circuit Breaker S68, 20 A (behind fuse/relay panel) O.K.

Tools required:
- Multimeter Fluke 83
- Applicable wiring diagram

Preparation:
- Switch OFF ignition and all electric consumers
- Disconnect 18-pin connector from Convertible Top Control Module -J256-.
- Remove Convertible Top Operation Switch -E137- from instrument panel, and disconnect 6-pin connector.