Glove Box Lamp: Service and Repair

CAUTION: This procedure is for vehicles WITHOUT Passenger's Side Airbag Only.

Removing:





- Position screwdriver at top portion of glove compartment light as shown and carefully pry out light.
- Remove glove compartment light -W6- (lens, bulb holder and microswitch).
- Replace bulb (12 V/3 W) as necessary.

Installing:
- Install glove compartment light -W6- (lens, bulb holder and microswitch).
- Check operation of glove compartment light -W6-; ensure light goes out when glove compartment lid is closed.