Rear Bumper: Locations

Bumper Cover:

The image shows either a Golf or Jetta bumper. The bumpers differ from each other only in style.

1 - Cover
- Material: PP/EPDM
- Removing
2 - Guide
- To remove/install bumper, pull out or push in parallel to guides at left and right
3 - Bolt
- Qty. 6
- 1.2 Nm (11 in. lb)
4 - Mounting strip
5 - Bolt
- Qty. 4
- 15 Nm (11 ft lb)
6 - Impact strip
7 - Bolt
- 15 Nm (11 ft lb)
- Only for Jetta bumper

Bumper Beam:

The image shows either a Golf or Jetta bumper. The bumpers differ from each other only in style.

1 - Bumper beam
2 - Screw
- Qty. 6
- 1.2 Nm (11 in. lb)
3 - Mounting strip
4 - Guide
- To remove/install bumper, pull out or push in parallel to guides at left and right.
5 - Screw
- Qty. 4
- 20 Nm (15 ft. lb)