Fluid - M/T: Testing and Inspection

5 Speed Manual 02J

Gear oil, checking
Gear oil specification. Refer to Specifications
- Remove insulation tray below engine/transmission, if fitted.

Fill Plug Location 5 Speed Manual 02J:

- Remove plug (arrow) to check oil
The oil level is correct when the transmission is full to the lower edge of the filler hole.
- Install plug (arrow).

Adding Transmission Oil
- Remove plug (arrow).
- Top up oil to lower edge of filler hole.
- Install plug (arrow).
- Start engine, engage gear and allow transmission to turn for approx. 2 minutes.
- Switch off engine and remove plug (arrow).
- Top up oil to lower edge of filler hole again.
- Install plug (arrow).