Wiper Blade: Service and Repair

Wiper Rubber, Removing And Installing







- Using a pair of pliers, press together both steel strips on enclosed side of rubber, slide rubber sideways out of upper clip and remove rubber complete (slide rubber through remaining clips).







- Insert new rubber into lower clips of wiper blade.
- Insert both strips in the first groove of the rubber so that the recesses in the strips face the rubber and engage in the rubber lugs of the groove.
- Using pliers press both steel strips and rubber together and insert in the upper clips so that the lugs of the clips on both sides engage in the retaining slots -arrow- of the wiper blade rubber.