Preparing Window Flange For Glazing

Preparing Window Flange For Glazing







- Cut back remaining material using Scraper V.A.G1561/8, do not remove all residue under any circumstance.

NOTE: Residual material acts as a base for new adhesive sealing material. Keep adhesive surface free of dirt and grease.

CAUTION: Activator must not come into contact with paint - otherwise paint will be damaged.

Exception: If bonding is not performed immediately after cutting back, remaining material must be activated using Activator D181 801 A1.

NOTE: If body flange is being worked on or is partially replaced, it must be cleaned and primed again after painting corresponding area.