Activation Using Remote Control

Activation using remote control





1 - Unlock/disarm

2 - Lock/arm

3 - Rear lid

4 - Panic


When button -2- is pressed, and all the security points (doors, rear lid and hood) are closed, the system will beep once and flash the lights once indicating that the vehicle is locked and the anti-theft alarm system is activated. If the operation is repeated, the system beeps again and the vehicle is armed and locked again.

When one or more security points are open and the lock/arm button is pressed, the LED flashes (pre-arming) and there is no beep. The alarm system will arm and beep after all of the security points are closed.

Notes:

- The doors are locked when the alarm changes from pre-armed to armed and the beep is emitted (all doors closed).

- If the lock/arm button is pressed and there is no beep, it means that a door; the hood or the rear lid is not properly closed. After properly closing, a beep will be emitted.


If after more than one minute, one or more security points remain open the alarm will be armed automatically and it will protect only the closed security points. The LED will modify the flashing rhythm (a beep will be emitted).

When button -1- is pressed, the alarm will disarm, the vehicle will unlock and the lights will flash twice (no beep). If the operation is repeated the lights will flash twice again and the vehicle will unlock again.

If the vehicle is unlocked/disarmed with button -1-, and no security points were opened (doors or ignition) within 30 seconds, the vehicle will automatically be re-locked and the alarm will be re-armed again. This button can also be used to deactivate the panic function.

When button -3- is pressed, it will open the rear lid (it doesn't matter if the alarm is armed or not). If the alarm is armed, the system protects all of the other security points except for the rear lid. After closing the rear lid, there will be one beep (3 seconds later) and the rear lid will be protected again.

When button -4- is pressed, the alarm will sound for approximately 3 minutes. If during this time it is pressed again, the alarm turns off.

When the ignition is on, all the functions except lock/arm are enabled.