Fog/Driving Lamp Bulb: Fundamentals and Basics

CAUTION: Do not touch glass of halogen bulb with bare fingers. Skin oil will evaporate when bulb gets hot, dulling reflector and/or damaging bulb.

Removing:
- Remove fog light housing.





- Twist cover in direction of arrow and remove.





- Disconnect halogen bulb connector -1- (inside of cover).
- Unclip spring clip -2- and swing out.
- Remove bulb from housing.

Installing:
- Insert bulb so that recess in bulb holder aligns with housing guide lug. (Halogen bulb: 12 V/55 W)
- Continue installing in reverse order of removal.