4 Speed Automatic 01M

KICK DOWN SWITCH F8
1 Place spacer of 0.60 inch between accelerator pedal and pedal stop.
2 Fully depress accelerator until it contacts spacer and hold in position.
3 Open throttle by pulling on accelerator cable sleeve, then secure in this position using retainer clip.
4 Connect multimeter tool No. US1119, or equivalent, to kickdown switch using adapter switch tool No. VW 1594, or equivalent, switch must read infinite ohms.
5 Slowly depress accelerator pedal until full throttle is reached, after kickdown pressure point is reached resistance must drop to 0 ohms.
6 At this point accelerator pedal must be just short of the pedal stop.