Engine Controls - ECM Wiring Harness Connection

24 07 08

Mar. 29, 2007

2002044, Supersedes Technical Bulletin Group 24 number 00-01 dated October 23, 2000 due to inclusion into ElsaWeb.





Affected Vehicles

Condition

Electronic Control Module (ECM), Mating Harness Connector after Replacing ECM or Harness

If after replacing ECM Part No: 021906018B, or wiring harness, the ECM connector does not mate with the wiring harness connector.

Technical Background

Not applicable.

Production Solution

Not applicable.

Service





^ Locate and remove the alignment tab on the ECM (white arrow) by grabbing the tab with a pair of pliers and carefully twisting until the tab snaps off.


NOTE:
Care must be taken not to damage ECM pins when performing this procedure.

Installation of the wiring connector to the ECM can now be made.

Warranty

Information only.

Required Parts and Tools

No Special Tools required.

No Special Parts required. Always see ETKA for the latest part(s) information.