Brake Pedal to Brake Booster, Disconnecting and Connecting

Brake Pedal To Brake Booster, Disconnecting And Connecting
Special Tools





^ T 10006 Release tool

Disconnecting
- Remove trim below instrument panel.





- Remove screws -1-.
- Remove cover -A-.





- Remove connecting plate between clutch and brake pedals (arrows) (manual transmission).
- Remove brake light switch.





- Press brake pedal in direction of brake booster and hold.

1. Brake pedal
2. Push rod
3. Retaining tabs

- Insert special tool T 10006 and pull in direction of driver's seat while counter-holding on brake pedal -1-.

Note:
^ Do not allow the brake pedal to move backward.
^ The special tool presses the push rod ball head off the retaining tabs.
^ The illustration shows the pedal cluster removed.

- Pull special tool T 10006 and brake pedal toward driver's seat.

Note:
^ The brake pedal will now be pulled off the push rod ball head.

Connecting





- Hold push rod ball head in front of mounting and push brake pedal in direction of brake booster.
^ Push rod ball must be heard to snap into place

Continue installation in reverse order of removal.
- Adjust brake light switch. Refer to Lighting and Horns.