ABS System Components On Rear Axle

ABS System Components On Rear Axle, Removing And Installing

1. ABS wheel speed sensor
^ Before installing sensor, clean hole inner surface and coat with grease, Part No. G 000 650

2. Socket-head bolt
^ 8 Nm (71 inch lbs.)

3. Stub axle
4. Splash shield
5. Wheel hub with wheel bearing and rotor
^ Replace only as complete unit.
^ Removing and installing; Refer to Transmission and Drivetrain.

6. Self-locking 12-point nut
^ 175 Nm (129 ft. lbs.)
^ Always replace after removing

7. Cap
^ Pressing off and driving; Refer to Transmission and Drivetrain.

8. Brake disc
9. Phillips screw
10. Bolt
^ 60 Nm (44 ft. lbs.)
^ With dished spring washer

11. Brake drum
^ Brake drum diameter: 230 mm (9.055 inch)
^ Wear limit: 231 mm (9.094 inch)
^ Clean thoroughly, check for wear, damage, tolerances, damaged wheel bolt threads and braking surface wear.

12. Backing plate with brake shoes Release brake adjustment before removing brake drum. Service and Repair
13. Axle beam