Diesel Fuel Injection Components and Functions, Checking

Diesel Fuel Injection Components and Functions, Checking

WARNING!
Make sure that no electronic components are destroyed during testing by observing the following:
- Switch the Fluke 83 multimeter to the appropriate units range before connecting measuring cables!
- Always observe checking requirements!


NOTE:
- Use the Fluke 83 multimeter and VAG1527B Voltage tester for electrical checking.
- Specifications are valid for an ambient temperature range from: 0 to +40°C (+32 to 104°F)
- If measured values deviate only slightly from the specifications, clean the sockets and plugs on the tester and measuring cables, then repeat check. Before replacing a component, check wiring and connections. In cases of specifications less than 10 Ohms repeat the resistance measurement on the component.
- To connect a tester to the Test Box, use jumper wires from the VW1594 adapter kit.
- The terminal numbers of the plugs and the socket numbers on the Test Box are identical.