Alternator: Locations

Generator (GEN) assembly







CAUTION!
Before working on the electrical system:
- Determine the correct coding for the anti-theft radio.
- Switch ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, recode and check operation of the anti-theft radio. Also check the operation of the clock and the power windows.


Note: Checking generator (GEN)


Diesel engine with power- assisted steering and A/C compressor

1 - Bracket
2 - Hex nut
- 30 Nm (22 ft lb)
3 - Generator
- Tightening torque of B+ wire to generator
4 - Voltage regulator
- Removing and installing See item 7, item 6, and See item 5
- Checking carbon brushes
5 - Phillips- head screw
- M4 X 25mm
6 - End cap
7 - Hex bolts
- M3 X 18 mm
8 - Ribbed belt
9 - Washer
10 - Hex bolt
- M8 X 85mm
- 25 Nm (18 ft lb)
11 - Tensioning-roller
12 - Socket-head bolt
- M8 x 85mm
- 25 Nm (18 ft lb)