Doors: Description and Operation

1 - Door lock
- The door lock can only be removed with the assembly carrier.
- Removing and installing refer to "Door Lock, Removing and Installing". Service and Repair

2 - Cable
- Lock release

3 - Retaining bracket
- Bolted and riveted to door lock
- Not supplied with door lock

4 - Bearing plate
- Removing and installing refer to "Front Door Handle, Removing and Installing". Service and Repair

5 - Multi-point socket bolt
- Socket insert T 10011
- 8.5 Nm (76 in. lb)

6 - Door handle
- Removing and installing refer to "Front Door Handle, Removing and Installing". Service and Repair

7 - Cover (trim)

8 - Lock cylinder housing
- Removing refer to "Door Lock Cylinder Housing, Removing". Service and Repair
- Lock cylinder is not supplied individually

9 - Gasket
- Plastic

10 - Multi-point socket screw
- Socket insert T 10011
- 8.5 Nm (76 in. lb)
- Loosening this screw releases the lock cylinder housing -8-, it can then be pulled out of bearing bracket -4-

CAUTION: Loosen Multi-point socket screw -10- only, if screw is removed, the door lock must be removed to realign.