Hood Lock, Removing, Installing and Adjusting

Hood Lock, Removing, Installing And Adjusting







1 - Hood lock
- Adjusting: within elongated holes
- Removing:
- Flip up clip.
- Using a screwdriver, press apart clevis arms of release lever and remove lever.
- Remove bolts and.
- Unhook hood release cable, disconnect harness connector for microswitch (only vehicles with anti-theft warning system).

2 - Connecting plate
- Secured to lock carrier using pop rivets

3 - Release lever
4 - Clip
5 - Screwdriver (as assisting tool)
6 - Clip
7 - Bolt
- 5 Nm
- When reusing: Clean bolt thread using wire brush and nut thread using tap.
- Coat with locking fluid D 185 400 A2

8 - Bolt
- 15 Nm
- When reusing: Clean bolt thread using wire brush and nut thread using tap.
- Coat with locking fluid D 185 400 A2

9 - Hood release cable
10 - Microswitch