Erase DTC Memory (Function 05)
NOTE: The VAG 1552 Mobile Scan Tool (ST) can be used instead of the VAG 1551 Scan Tool (ST), however a print-out is not possible.
- Connect VAG 1551 scan tool. VAG 1551 Scan Tool Connecting
- Initiate On Board Diagnostic (OBD). On Board Diagnostic, Initiating Program
Requirements
- Functional check completed
- All malfunctions repaired
- DTC memory checked again
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.
Indicated on display
Rapid data transfer Q
05 - Erase DTC Memory
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer ->
DTC Memory is erased.
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
NOTES:
- This message indicates an error in the test sequence.
Attention!
DTC Memory was not interrogated
- Adhere exactly to the test sequence: first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory.
Indicated on display
Rapid data transfer HELP
Select function XX