Reading

Read Measuring Value Block (Function 08)


WARNING!
- Check the airbag system wiring by visual inspection only.
- Do not carry out electrical continuity tests or measurements to the igniter circuits.
- Only check the wiring with the ignition switched off.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select "Read Measuring Value Block" function 08.

Indicated on display


Rapid data transfer Q
08 - Read Measuring Value Block


- Press -Q- button to confirm input.

Indicated on display


Read Measuring Value Block HELP
Input display group number XXX


- Press buttons -0-, -0- and -1- to select display group 01 and press -Q- button to confirm input.

Indicated on display (1 - 4 = display fields)


Read Measuring Value Block 1
1 2 3 4


The explanation of the individual display fields on the display is found in the evaluation of display group numbers.


NOTE: Some of the indicated display groups are only meaningful for corresponding vehicle equipment (e.g. side airbag).

If the displayed values in all display fields are "correct:"

- Press -> button.







Indicated on display (after pressing -C- button)


Rapid data transfer HELP
Select function XX


NOTE: Check DTC memory after completing "Read Measuring Value Block" function 08.