Rear Seatbelt With Belt Tensioner - Assembly Overview

Rear Seatbelt With Belt Tensioner - Assembly Overview

CAUTION:
- Belt tensioner units must be removed before starting any separation work, repairs or bulge corrections.
- On the seatbelts with belt tensioner described in this chapter, there is the risk that not all ignition stages of the belt tensioner have ignited in a crash. Currently, there is no possibility to check this with workshop tools available. For this reason, these ignited seatbelts with belt tensioner are to be disposed of as belt tensioner units that have not ignited.







1 - Seatbelt with belt tensioner
- Retaining tabs determine position of automatic belt retractors

2 - Hex bolts
- 40 Nm

3 - Standard lock
4 - Belt guide
5 - Phillips-head screws
- 1.5 Nm

6 - Seatbelt guide
7 - Oval head bolt
- This bolt is installed in Passat wagons only.
- 5 Nm