Programming and Relearning

Code Security

- The security code is "fixed',' meaning the radio is programmed by the radio manufacturer to accept only one code. This code must be input during the new vehicle delivery inspection, into newly installed or existing units removed and reinstalled.

Prerequisites:
- Obtain security code, either from code card or from customer.
- Fuse 37 OK (S 237 in wiring diagram)

Inputting code
- Switch on radio
- Press "Seek" and "Scan" buttons simultaneously until radio display indicates " 1000'.'
- Input the security code using the station preset buttons on the radio. Button " 1 " corresponds to the first number in the security code, " 2 " the second and so on. Press the applicable button repeatedly until the desired number appears in the display (eg.: press button " 1 " three times it the first number in the code is 3).
- When the entire code has been input and appears on the display, press "Seek" and "Scan" buttons simultaneously.

- The code is input properly when the display indicates "SAFE" and then a radio frequency (ready for use). When the radio is switched off and the ignition key removed, a flashing LED on the radio faceplate indicates the radio is security protected.