Seat Adjustment on Board Diagnostic (OBD), Initiating

Seat Adjustment On Board Diagnostic (OBD), Initiating

Test requirements:
- Voltage supply and fuses for the respective system OK.
- To initiate the On Board Diagnostic (OBD) the ignition must be switched on "Terminal 15 on."


NOTE:
- If the display remains blank, check VAG 1551 voltage supply according to wiring diagram.
- Additional operating information can be printed out depending on the program by pressing the HELP key of VAG 1551.
- The -> key is used for advancing the program sequence.
- The PRINT key is used for switching on the printer (warning lamp in key lights up).


- Connecting Scan Tool.
- Switch on ignition.
- Switch on printer with Print button (warning lamp in button lights up).
- Press key -1- for "Rapid Data Transfer" mode.

Indicated on display


Rapid data transfer HELP
Enter address word XX


Address word for the seat adjustment: 36

Indicated on display


Rapid data transfer HELP
Enter address word XX


- Press keys -3- and -6-.

Indicated on display after entering the address word 36.


Rapid data transfer Q
36 - Seat adjustment


- Confirm with -Q- key.

and then the following appears in the display:

Indicated on display


Rapid data transfer
Tester sends the address word 36


The control module identification will be shown on the VAG 1551 Scan Tool display, e.g.:


3B1959760XX Seat adjustment FS0001->


- Press -> key.

Indicated on display


Rapid data transfer HELP
Select function XX