ATF Lines - With Air Conditioning

ATF lines, removing and installing
Diesel engine and four-cylinder gas engine with air conditioning system.
^ Thoroughly clean connections and immediate vicinity before loosening.
^ Insert ATF lines completely by hand onto stop in transmission or cooler and then screw on.
^ After replacing ATF lines, check and fill ATF level, if necessary.

Diesel engines and four-cylinder gas engines with air conditioning





1. Bolt
^ 5 Nm (44 inch lbs.)
^ Insert lines completely first and then tighten
2. O-ring
^ Coat with ATF
^ Always replace
3. Bolt
^ 20 Nm (15 ft. lbs.)
^ Insert lines completely first and then tighten
4. O-ring
^ Coat with ATF
^ Always replace
5. Bracket
^ Insert onto stop on transmission
6. Bolt
^ 10 Nm (7 ft. lbs.)
7. Union nut
^ 30 Nm (22 ft. lbs.)
8. Clamp
9. Bolt
^ 5 Nm (44 inch lbs.)
10. Bracket
11. Bracket
^ On engine/transmission support
12. Bolt
13. Nut
^ 5 Nm (44 inch lbs.)