Final Drive: Overview

Final Drive, Adjustment Overview





1. Shim S1 for ring gear
2. Tapered roller bearings for differential
3. Shim S2 for ring gear
4. Drive pinion
^ Adjusting ring gear and pinion shaft. Pinion and Ring Gear
5. Shim S3 for drive pinion
6. Large tapered roller bearing for drive pinion
7. Input gear
^ Adjusting. Input Gear
8. Tapered roller bearings for input gear
9. Shim for input gear
10. Small tapered roller bearing for drive pinion
11. Shim S4 for drive pinion
12. Output gear
13. Ring gear
^ Adjusting ring gear and pinion shaft.
14. Tapered roller bearings for differential

Adjustments To Be Completed After Replacing Individual Components





The following components only require adjustment if individual components have been replaced that directly affect the final drive adjustment. To eliminate unnecessary adjustments refer to the table provided.

Footnote:
(1) If input gear was readjusted, readjust planet carrier and clutch play between K1 and K2.