Preparing Window Flange For Glazing

Preparing Window Flange For Glazing

- Cut back remaining material using U-shape scraper V.A.G 1561/8, do not remove all residue under any circumstance.

NOTE: Residual material acts as a base for new adhesive sealing material. Keep adhesive surfaces free of dirt and grease.

CAUTION: Activator must not come into contact with paint, otherwise paint will be damaged.







Exception: If bonding is not performed immediately after cutting back, remaining material must be activated using Activator D 181 801 A1.

- If body flange is being worked on or is partially replaced, it must be cleaned and primed again after painting corresponding area.