Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

Diagnostic Trouble Code (DTC) memory, erasing (function 05)

Note: Erasing DTC memory (function 05) is only possible after checking DTC memory (function 02). If DTC memory cannot be erased, check DTC memory again and correct indicated malfunctions.

Prerequisites

- Check DTC memory.

- All malfunctions repaired.

After checking DTC memory:

Readout in display:





- Press buttons -0- and -5- to select function 05, "Erase DTC memory".

Readout in display:





- Press -Q- button to confirm input.

Indicated on display: (DTC Memory is erased)





- Press -> button.

Indicated on display (select function):





- End output (function 06).

Note:

If this appears in display, test sequence is malfunctioning.





If this appears in display, test sequence is malfunctioning.





Adhere to test sequence: First check DTC memory, repair malfunctions if necessary, then erase.