Front Door - Assembly Overview

Front Door - Assembly Overview







1 - Door
- Adjusting - on hinge, within oversized holes

2 - Window guide, front
3 - Outer window recess seal
- Inserted on flange

4 - Inner window recess seal
- Inserted on flange

5 - Door window
6 - Counter bearing
7 - Wedge
- Adjusting door window pre-load

8 - Stopper
- Must be transferred when replacing door

9 - Bolt
10 - Window guide, rear
11 - Cover
- For sealing side impact member/installation opening

12 - Window regulator
13 - Bolt
- 23 Nm

14 - Side impact member
15 - Door check strap boot
16 - Door check strap
17 - Bolt
- 7.5 Nm

18 - Pin
19 - Mounting nut
- 6.5 Nm

20 - Door check strap cover
- Self-adhering - applied to A-pillar

21 - Cap
22 - Set screw
- 23 Nm

23 - Torx bolt T45
- 36 Nm

24 - Door hinge
- Bolted on door and A-pillar. Hinge pin inserted in box section and secured with set screw