Front Seat Cover and Padding, Removing and Installing

Front Seat Cover And Padding, Removing And Installing







1 - Cover
- Removing:
- Remove backrest.
- Pry out clips, bend tabs up, disengage tension wire, pry out cover with rear reinforcement from seat frame, unhook cushion wires from cushion.

2 - Cushion wire
- Hooked into cushion, unhook and hook using awl V.A.G 1636
- Comfort seat: Cross-routed cushion wire located at front
- Sport seat: Cross-routed cushion wire located at rear

3 - Cushion
4 - Tension wire
- First secure cover with clips, then hang on tabs, pull tension wire taut and hook in.

5 - Clip
6 - Seat frame
7 - Tabs
8 - Clip