Test Requirements

Test Requirements
^ All four tires must be same (approved) size, inflated to correct pressure.
^ Conventional brake system including brake light switch and brake lights OK.
^ No hydraulic leaks (visual check of hydraulic unit, brake calipers, wheel cylinders, tandem master brake cylinder).
^ Wheel bearings and wheel bearing adjustment OK.
^ Control Module is correctly fastened to hydraulic unit.
^ Connector on ABS Control Module -J104- correctly connected (retainer is engaged).
^ Check ABS component contacts for damage and correct seating.
^ All fuses OK according to wiring diagram (remove fuse from fuse holder to check).
^ Supply voltage OK (at least 10.0 W)