Initiating
Initiating Basic Setting
Special Tools And Equipment
^ VAG 1869 Brake filling and bleeder unit
On vehicles with EDL basic setting is used to bleed hydraulic unit.
Basic setting only necessary when one or more brake fluid reservoir chambers is empty (e.g. leaks in brake system).
Basic settings must be set after brake system repair.
- Connect brake fill and bleed tool VAG 1869.
- Connect Scan tool VAG 1551 and select (address word -03-) "Brake electronics Control Module" with ignition switched on. VAG 1551 Scan Tool Connecting and Selecting Function
Indicated on display
- Press buttons -0- and -4-. ("Initiating basic setting" is selected with -04-).
Indicated on display
- Confirm entry with button -Q-.
Indicated on display
- Press buttons -0-, -0- and -1-
- Confirm entry with -Q- button.
Indicated on display
Note:
Press pedal with substantial pressure and hold.
^ Pedal moves down
^ Hydraulic pump runs
^ Pedal comes back
Indicated on display
- Press button -3-
Indicated on display
^ Hydraulic pump -V64- runs
Indicated on display
- Press button -3-
Indicated on display
- Press pedal with substantial pressure and hold.
^ Pedal moves down
^ Hydraulic pump -V64- runs
^ Pedal comes back
Indicated on display
- Press button -3
Indicated on display
- Hydraulic pump runs
Indicated on display
- Press button -3-
Indicated on display
- Press pedal with substantial pressure and hold.
^ Pedal moves down
^ Hydraulic pump -V64- runs
^ Pedal comes back
Indicated on display
- Press button -3
Indicated on display
^ Hydraulic pump runs
Indicated on display
- Press button -3-
Indicated on display
- Press pedal with substantial foot pressure and hold.
^ Pedal moves down
^ Hydraulic pump -V64- runs
^ Pedal comes back
Indicated on display
- Press button -3
Indicated on display
^ Hydraulic pump runs
Indicated on display
- Press button -3-
Indicated an display
- Press pedal with substantial foot pressure and hold.
^ Pedal moves down
^ Hydraulic pump -V64- runs
^ Pedal comes back
Indicated on display
- Press button -3
Indicated on display
^ Hydraulic pump runs
Indicated on display
- Press button -3-
Indicated on display
- Press pedal with substantial foot pressure and hold.
^ Pedal moves down
^ Hydraulic pump -V64- runs
^ Pedal comes back
Indicated on display
- Press button -3
Indicated on display
^ Hydraulic pump runs
Indicated on display
- Press button -3-
Indicated on display
- Press pedal with substantial foot pressure and hold.
^ Pedal moves down
^ Hydraulic pump -V64- runs
Indicated on display
- Press button -3
Indicated on display
^ Hydraulic pump runs
Indicated on display
- Press button -3-
Indicated on display
- Press pedal with substantial foot pressure and hold.
^ Pedal moves down
^ Hydraulic pump -V64- runs
^ Pedal comes back
Indicated on display
- Press button -3-
Indicated on display
^ Hydraulic pump runs
Indicated an display
- Press button -3-
Indicated on display
- Press -> button.
Indicated on display
- Press buttons -0- and -6-, ends output.
Indicated on display
- Confirm entry with -Q- button
Indicated on display
- Press -C- button
- Switch off ignition.
- Disconnect Scan tool VAG 1551