Auxiliary Airbag Tester VAS 5056

Auxiliary Airbag Tester VAS 5056

Using Auxiliary airbag tester VAS 5056, it is possible to test individual components of airbag system and to check which components are actually malfunctioning.

Connecting Auxiliary airbag tester VAS 5056 to drivers airbag components
Driver-side airbag and lower trim section for steering column switch removed.







- Attach ignition pill connector to inert ignition pill - 1 - and disconnect wiring harness to Airbag Spiral Spring/Return Spring With Slip Ring F138 Connect yellow 2-pin connector - 3 - of Airbag wiring harness. VAS 5056/1 to wiring harness/airbag.

1 - Igniter connector on inert igniter
2 - Button
3 - Harness connector for Airbag Spiral Spring/Return Spring With Slip Ring F138 connector

Connecting Auxiliary airbag tester VAS 5056 to passengers airbag components
- Remove passenger-side storage compartment.







- Disconnect wiring harness to airbag module and connect yellow 2-pin connector - 2 - of Wiring harness/passenger airbag. VAS 5056/1.







1 - Button
2 - Connector for wiring harness/passenger-side airbag
3 - Connector (not applicable)
4 - Connector (not applicable)