Brake Light Switch: Adjustments

Brake Light Switch, Adjusting
- Remove brake light switch to adjust.
- Remove driver's side storage shelf.
- Remove connector from brake light switch.
- Remove brake light switch by turning to right 90°.
- Pull brake light switch out.
- Press brake pedal down as far as possible by hand.
- Guide brake light switch through opening and turn 90° left when installing.
- Release brake pedal.
- Connect brake light switch connector.
- Install driver's side storage shelf.
- Operate brake pedal.
^ Brake lights illuminate.
- Remove foot from brake pedal.
^ Brake lights must not illuminate.