Final Drive, Overview

Note:
^ Before installing final drive measure friction torque at axle shaft.





1. Planetary gear
^ Disassembling and assembling.
2. Input gear
^ Removing and installing.
^ Adjusting.
^ Adjusting final drive (overview).
^ Repairs on input gear can only be performed after individual components of transmission have been removed.
3. Drive pinion
^ Adjusting.
^ Final drive, adjusting (overview).
4. Differential
^ Removing and installing.
^ Disassembling and assembling.
^ Adjusting.
^ Final drive, adjusting (overview).

Before Disassembling Final Drive
- Measure friction torque at axle shaft,

Note:
^ Measured friction torque must be recorded.

Measure friction torque





A-Torque gauge 0 - 600 Nm (0 - 53 inch lbs.)
B-Socket wrench 41 mm

Note:
^ Adjustments required when replacing individual components.
^ Adjustments to transmission are only required if components are being replaced, which directly affect final drive.
^ To determine what adjustments can be avoided refer to chart.