Read Measured Value Block (Function 08)
Special Tools and Equipment
VAG 1551 scan tool with cable VAG 1551/3
Procedure
- Connect scan tool. VAG 1551 Scan Tool Connecting
- Initiate OBD. Initiating On Board Diagnostic Program
The measured values in "measured value block" and "basic setting" are described during the individual component test. This table serves only as an overview.
The measured value block is divided into 16 display group numbers. The assignment of the individual display fields can be taken from the display group overview below.
Indicated on display:
Rapid data transfer HELP
Selection function XX
- Press buttons -0- and -8- to select "Read measured value block" function 08.
Indicated on display:
Rapid data transfer Q
08 - Read measured value block
- Confirm entry with -Q- button.
Indicated on display:
Read measured value block HELP
Input display group number XX
NOTE: The display group number 001 below is an example, to illustrate the sequence.
- Press buttons -0-, -0- and -1- to select "Display group number 1" and confirm entry with -Q- button.
Indicated on display: (1 - 4 = Display fields)
Read measured value block 1 ->
1 2 3 4
NOTE: To change to another display group proceed as shown in image below:
Displayed after pressing -C- button:
Indicated on display:
Read measured value block HELP
Input display group number XXX
- Enter display group number required.
Display Group Overview
Display Content For Display Group 001:
Evaluating Display Group 001:
Display Content for Display Group 002:
Evaluating Display Group 002, Part 1:
Evaluating Display Group 002, Part 2:
Display Content For Display Group 003:
Evaluating Display Group 003:
Display Content For Display Group 004:
Evaluating Display Group 004:
Display Content For Display Group 005:
Evaluating Display Group 005:
Display Content For Display Group 006:
Evaluating Display Group Number 006:
Display Content For Display Group 007:
Evaluating Display Group 007:
Display Content For Display Group 008:
Evaluating Display Group 008:
Display Content For Display Group 009:
Evaluating Display Group 009:
Display Content For Display Group 010:
Evaluating Display Group 010:
Display Content For Display Group 011:
Evaluating Display Group 011:
Display Content For Display Group 012:
Evaluating Display Group 012, Part 1:
Evaluating Display Group 012, Part 2:
Display Content For Display Group 013:
Evaluating Display Group 013:
Display Content For Display Group 014:
Evaluating Display Group 014:
Display Content For Display Group 015:
Display Content For Display Group 015:
Possible Display
Rear lid/tailgate contact switch 1
Right rear rotary latch switch 2
Left rear rotary latch switch 4
Front passenger rotary latch switch 8
Ignition 16
Interior monitor 32
Hood contact switch 64
Driver's rotary latch switch 128
No alarm 255
Display Content For Display Group 016:
