Display Groups 30-49, 99, 107 (Oxygen Sensor Control)
- Engine running at idle
Indicated on display
Read Measuring Value Block 30 ->
Display Group 30:
Meaning of 3 digit number block in display fields 1 and 2:
- Engine running at idle
Indicated on display
Read Measuring Value Block 32 ->
Display Group 32:
Initiating adaptation: Control module in mode 04, basic setting
- Adaptation conditions for idle: Idle, coolant temperature at least 75 °C, intake air temperature max. 90 °C
- Adaptation conditions for partial throttle: Coolant temperature at least 75 °C, intake air temperature max. 90 °C
Evaluation display group 32, display field 2 through 4-oxygen sensor adaptation values
- Engine running at idle
Indicated on display
Read Measuring Value Block 33 ->
Display Group 33:
Oxygen sensor voltage U lambda in mV
A: Oxygen sensor voltage high
- rich mixture (excess fuel or too little oxygen)
- high CO value
B: Oxygen sensor voltage low
- Glean mixture (too little fuel or excess oxygen)
- low CO value
Evaluation display group 33, display field 1 - oxygen sensor control before catalytic converter
Evaluation display group 33, display field 2 - oxygen sensor voltage before catalytic converter
Readiness code
- Vehicle standing, engine running at increased idle
- Control module in mode 04, basic setting
Indicated on display
Read Measuring Value Block 34 ->
Display Group 34:
Readiness code
- Engine running at idle
- Control module in mode 04, basic setting
Indicated on display
Read Measuring Value Block 36 ->
Display Group 36:
Evaluation display group 36, display field 1 - sensor voltage of oxygen sensor behind catalytic converter
Readiness code
- Engine running at idle
- Control module in mode 04, basic setting
Indicated on display
Read Measuring Value Block 37 ->
Display Group 37:
- Engine running at idle
Indicated on display
Read Measuring Value Block 41 ->
Display Group 41:
Readiness Code
- Vehicle standing, engine running at increased idle
- Control module in mode 04, basic setting
Indicated on display
Read Measuring Value Block 43 ->
Display Group 43:
Readiness code
- Vehicle standing, engine running at increased idle
- Control module in mode 04, basic setting
Indicated on display
Read Measuring Value Block 46 ->
Display Group 46:
- Engine running at idle
- Control module in mode 04-basic setting, oxygen sensor control off
- Control module in mode OB-read measuring value block, oxygen sensor control on
Indicated on display
Read Measuring Value Block 99 ->
Display Group 99:
Readiness code
- Engine running at idle
- Control module in mode 04, basic setting
Indicated on display
Read Measuring Value Block 107 ->