Control Module For Multi-Function Steering Wheel Remove/Install

Control Module For Multi-Function Steering Wheel -J453-, Removing And Installing


CAUTION!
Before working on the electrical system:
- Determine the correct coding for the anti-theft radio.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio, Also check operation of clock and power windows according to Repair Manual and/or Owner's Manual.


Removing

- Remove lower footwell cover to gain access to 13 position relay carrier.







- Remove module -J453- position -5- and -6- ,from relay carrier -A-.

Installing

- Install in reverse order of removal.
- Coding multi-function steering wheel control module