Intake Manifold Lower Section, Disassembling and Assembling

NOTE: For additional information regarding the Removal and Installation procedure please refer to: Vehicle /Engine, Cooling, and Exhaust /Engine /Cylinder Head Assembly /Valve Cover / Service and Repair.
Service and Repair



Intake Manifold Lower Section, Disassembling and Assembling







1 - Cable Guide.
- Clipped onto fuel rail.

2 - 10 Nm.

3 - Fuel Rail.

4 - Supply Connection.

5 - Return Flow Connection.

6 - Intake Manifold Lower Section.

7 - Seal.
- Always replace.

8 - To Intake Hose.
- For air circulation of fuel injectors.

9 - Bracket.
- For Secondary Air Injection (AIR) pump motor -V101- and secondary air inlet valve.
- Secondary air system.







10 - 25 Nm.

11 - O-ring.
- Always replace if damaged.
- Before installing, moisten with clean engine oil.

12 - Injectors -N30- through -N33-, -N83- and -N84-.
- Air shrouded.
- Check.

13 - Retaining clip.
- Check securely seated.

14 - Vacuum connection.
- To T-piece connection non-return valve / intake manifold upper section.

15 - Fuel pressure regulator.
- Check.