Front Seat Height Adjuster, Removing and Installing

Front seat - assembly overview





NOTE: Left seat illustrated and right seat is a mirror image.

1 - Seat trim
- Front right
2 - Screw
3 - Seat trim
- Rear right
4 - Seat bottom
5 - Backrest
6 - Transfer rod
- For backrest adjustment
7 - Adjusting knob
- For lumbar support
8 - Seat trim
- Rear left
9 - Spacer
10 - Adjusting knob
- For backrest angle
11 - Cover cap
- Qty. 2
12 - Screw
- Qty. 2
13 - Adjusting lever
- For seat height
14 - Seat trim
- Front left
15 - Seat height adjusting element
16 - Spring
- Qty. 2
17 - Screw

Removing

NOTE: Seat must be raised to highest position to relief tension on spring -16- as much as possible before removal.

- Remove seat.
- Remove screw -2- and unclip trim -1-.
- Unclip two cover caps -11-, remove two screws -12- and remove adjusting lever -13-.
- Remove screw -17- and unclip trim -14-.





- Unhook spring -2- carefully.
- Remove bolts -arrows- and pull seat height adjuster -1- out from seat frame.

Installing
Install in reverse order of removal.

NOTE: Tightening torque for bolts -arrows- is 10 Nm (7 ft lb).