Instrument Panel, Gauges and Warning Indicators: Locations

Electrical And Electronic Components, Locations


CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.







1 - Sender for gauge sender -G-
- Location See Fig. 1
- Monitored by OBD
2 - Outside Air Temperature Sensor -G17- (where applicable)
- Location See Fig. 2
- Monitored by OBD
3 - Speedometer - Vehicle Speed Sensor (VSS) -G22-
- Location See Fig. 3
4 - Engine Coolant Temperature (ECT) Sensor -G2-
- Location
- Monitored by OBD
5 - Not applicable
6 - Instrument Cluster -K
- Monitored by OBD

Fig. 1 Sender for fuel gauge -G-







Located in fuel tank on fuel delivery unit -arrow-.

Fig. 2 Outside Air Temperature Sensor -G17- (where applicable)







Sensor -arrow- located on left of front bumper behind outer air grill.

Unclip air grill to remove sender.

Fig. 3 Speedometer Vehicle Speed Sensor -G22-







Sensor -arrow- located near left-hand drive shaft flange on manual and automatic transmission vehicles.